National Repository of Grey Literature 94 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Analysis of the Humidity of the Green Roof During the Year
Jílek, Jan
The article deals with the analysis of moisture in the layers of a green roof. Climatic conditions change throughout the year and the amount of moisture in the composition of the green roof is related to them. This article analyzes the data collected throughout the year. The expected output from the completed measurements should be an optimized maintenance plan for the extensive green roof. The current data serves as an informative sample of the amount of moisture depending on the weekly precipitation total.
High standard detached house
Zezulová, Jitka ; Mocová, Pavla (referee) ; Daněk, Lukáš (advisor)
This bachelor work solves project documentation of a high standard detached house . The building is designed on gently sloping land in the village of Dolní Heřmanice. Access to the building is from the local paved road, the entrance to the house is on the first floor. The house is designed as a standalone house with two floors, the second floor is above the portion of the first floor. Roofing of the building is a combination of two flat roofs and pent roof. The structural system of the house is made of brick blocks, including the ceiling construction. It is designed for a family of four.
THE DESIGN AND OPTIMALIZATION OF SELECTED CONSTRUCTIONAL TECHNOLOGICAL PROCESSESS OF SUSTAINABLE ENVIRONMENT-FRIENDLY CONSTRUCTION OF THE VEGETATIVE ROOF
Selník, Petr ; Vranayová,, Zuzana (referee) ; Šuhajda, Karel (referee) ; Mohapl, Martin (advisor)
This presented dissertation is focused on the installation technology of green roofs and sustainable long-term stability considering the construction and runoff water management. The main topic of the study and research was the technical layer application, especially the newly developed retention board made of recycled polyester fiber and non woven textiles. Consistent monitoring was performed in the climatic conditions of the Czech Republic and selected installation technology.
Meatpacking plant
Majtán, Marián ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The diploma thesis is focused on project documentation of Meat packing plant. Along with meat processing the documentation solve question of accomodation for employees. Building consists of two main sections: The processing – it is structured under requierements of meat packing industry. Second one is residential part set in 2nd, 3rd and 4th floor. Main inspiration for design are meat packing plants in Scandinavian countries, where is often need to provide accomodation to employess because of disadvantageous geographic locality. Building is built of Heluz building system, perimeter walls consists of insulation filled blocks. Building is without basement and it is based on footings of plaint. The roof is flat, partially designed as extensive green roof. Isover system is used to thermal insulation. A part of object is also asphalted plain for transport goods to and from the meat packing plant.
Accommodation
Maryšková, Eva ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The aim of my thesis is to design new Guest house in Čeladná. First part is focused on building design and construction. Second part is focused on heating, ventilation and air conditioning (HVAC) design and renewable energy sources. Third part is focused on detailed solution of noise and vibration from the environment around building. Guest house is three – storey building but there is one more underground storey for technical facilities. Ground floor contains staff facilities, restaurant, entrance hall with stairs and office. On the second floor we can find four guest rooms with terrace and corridor. On the third floor we can find three guest rooms. Heating in the building is secured by gas condensing boilers. Ventilation is provided by two air condition units. Each guest room has radiators and cooling distribution units and ventilation. Cooling is secured by one cooling unit on the green roof. On the gable roof we can find 75 photovoltaic panels. Third part is focused on detailed solution of noise, vibration from the environment around building and spatial acoustics of guest room. The thesis is carried out in AutoCAD, Sketch up, Lumion and DEKSOFT software. All structures comply with the valid standards and regulation.
Kindergarten
Konečný, Jan ; Hudcová, Šárka (referee) ; Čuprová, Danuše (advisor)
This diploma thesis is exploring the plan for the construction of kindergarten in the city of Velíková. The kindergarten is located in the north part of the properties with numbers 528/1 and 63. It is a two-floor building with partial basement. The building is designed for three classes with the total number of pupils being 54. In the western part of the property a car park is designed with 18 parking spaces in total. From the layout perspective, on the first floor, there are two classes and a utility rooms for the employees. All rooms have a separate entrance, so that there is no obstruction or interference. On the second floor, there is one class and a school staffroom situated. There are storage and a technical facility located in the cellar. The building’s supporting system is made from sand-lime bricks. Reinforced concrete panels Spiroll create the roof construction. The diploma thesis contains project documentation for construction work.
Senior centre in Ždár nad Sázavou
Brukner, Josef ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of this master thesis is to design home for the residential care of elderly and disabled people in Žďár nad Sázavou. It is designed as a three-storey building with a basement. There are technical facilities, in the basement. Canteen, doctor´s office, manager‘s office and reception are located on the first floor. Second and third floor contains common premises and residential units.building has a prefabricated reinforced concrete structural framework with mineral wool thermal insulation. It is covered with an extensive green roof. Piles are designed as the foundation. Partition wall is designed from plasterboard. The project and 3D rendering were carried out in Revit and Lumion software. All structures comply with the valid standards and regulations. The building site contains also an outdoor car park and a park.
Apartment building
Staněk, Matěj ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of an apartment building in Hradec Králové on U parku street. It is a building with four above-ground and one underground floor. The vertical load-bearing structures are made of Porotherm clay blocks, the horizontal load-bearing structures are made of MIAKO clay floor blocks, placed on ceramic-concrete ceiling joist and filled with concrete. In the basement there are garages for six cars and storage space. There are eleven residential units on the upper floors. The roof is designed as warm flat roof with growing layer.
Multipurpose facility -Nitra,Chrenová
Vaňová, Vanessa ; Lipka, Miroslav (referee) ; Eliáš, Luboš (advisor)
The aim of the bachelor's thesis is to design and develop project documentation for the construction of new apartment buildings in the city of Nitra. It is a free-standing building with three above-ground and one underground floor in a slightly sloping terrain. The basement of the floor plan extends beyond the above-ground floor, the roof is partly designed as a terrace and partly as a flat green roof. There is a garage, workshop, cellar, utility room and storage for bicycles and stollers. Housing units are located on the upper floors. Each floor has three residential units. The roof above the above-ground floors is a single-skin flat, covered with a layer of aggregate. The foundation structures and the perimeter walls of the basement are made of monolithic reinforced concrete. The internal load-bearing system is designed for all floors as masonry made of ceramic blocks. In the basement there are two supporting concrete pillars transferring the load from the reinforced concrete gutters in the place above the garage. Ceilings, balconies and loggias are made of monolithic reinforced concrete. The perimeter walls above the ground are contact-insulated with the ETICS system.
Kindergarten in Rajhrad
Murín, Marek ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The topic of my thesis is the design of a kindergarten in Rajhrad. The building is one storey with a flat roof. In the middle of the building there are technical facilities, a kitchen, a director's office and facilities for staff. On the sides there are classrooms with bathrooms and cloakrooms. The load-bearing masonry is designed of Heluz ceramic blocks. The perimeter masonry is insulated with the ETICS contact insulation system. The roof structure is made of prefabricated floor slabs SPIROLL. The building is covered by a green flat roof. The building will be heated by a gas condensing boiler. It will have an air handling unit located on the roof along with photovoltaic panels. Intelligent LED lighting will be deployed throughout the building. The third part deals with the comparison between masonry construction and the more environmentally friendly clay construction. Specifically, it compares the CO2 production of masonry and clay construction of the same building using the SBToolCZ methodology. The results obtained showed that the clay building produces approximately 30% less CO2 than the masonry building. I created my thesis using ArchiCAD and DEKsoft software.

National Repository of Grey Literature : 94 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.